Motor Saver 201-575-AU Fiche technique télécharger pdf (Page 46)

www.symcom.com • 800-843-8848 • fax: 605-348-5685

Available Models:

Features:

• DIN rail or surface mountable

• Unique probe protection algorithm

• Invertible relay logic for use in pump-up

and pump-down applications

• Adjustable debounce timer

• Microcontroller based

• 2 relay contacts

• LED status indicators

pprovals:

Specications

460-15-100-LLS

The Model 460-15-100-LLS

is a liquid level sensor to detect the presence

of conductive liquids. A probe is mounted

at the desired tank level and connected to the

PumpSaver

. When the probe is submersed, the

PumpSaver’s output contacts will change state as

soon as the debounce time expires. The adjustable

debounce timer is intended to prevent nuisance

actuating due to waves or splashing in the tank.

Relay logic can be inverted so the PumpSaver’s

output contacts change state when the probe is no

longer submersed. This makes the unit versatile for

use in pump-up and pump-down applications.

For more information see:

See Appendix A, page 69, Figure 11 for dimensional

drawing.

See Appendix B, page 79, Figure 39 for typical

wiring diagrams.

Model 460-15-100-LLS

single-channel liquid level sensor, din rail mount, adjustable debounce timer

Liquid Level Sensor

Surge

IEC ...........................................IEC 61000-4-5, Level 3, 4kV line-to-line;

Level 4, 4kV line-to-ground

ANSI/IEEE ....................................C62.41 Surge and Ring Wave Compliance to

a level of 6kV line-to-line

Hi-Potential Test ...............................Meets UL508 (2 x rated V + 1000 V for 1 min.)

Safety Marks

UL ............................................UL508 (File #E68520)

CE ............................................IEC 60947

Enclosure ......................................Polycarbonate

Dimensions ....................................3.5” H X 2.084” W X 2.350” D

(88.9 x 52.93 x 59.69mm)

Weight ........................................1 lb. (16 oz., 453.59 g)

Mounting Method ..............................35mm DIN rail or Surfact Mount

(#6 or #8 screws)

*Note: 50Hz will increase all delay timers by 20%

Input Characteristics

Control Voltage .................................110/120VAC nominal

Frequency .....................................50*/60Hz

Sensitivity .....................................100kΩ

Functional Characteristics

Probe Sense Voltage ............................5vdc pulsed

Debounce Time Delay ...........................2-60 seconds

Output Characteristics

Output contact Rating – (Two Form A - DPST)

Pilot Duty .....................................360VA @ 240VAC

General Purpose ................................8A @ 240VAC

General Characteristics

Ambient Temperature Range

Operating .....................................-40° to 70°C (-40° to 158°F)

Storage ........................................-40° to 80°C (-40° to 176°F)

Maximum Input Power ..........................2 W

Class of Protection ..............................IP20, NEMA 1 (finger safe)

Relative Humidity ..............................10-95%, non-condensing per IEC 68-2-3

Terminal Torque. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 in.-lbs.

Wire ..........................................12-20 AWG

Standards Passed

Electrostatic Discharge (ESD) .....................IEC 61000-4-2, Level 3, 6kV contact,

8kV air

Radio Frequency Immunity, Radiated .............150MHz, 10 V/m

Fast Transient Burst IEC .........................61000-4-4, Level 3, 3.5kV input

power and controls

CATALOG_SYMCOM_2014.indd 44 6/10/14 11:06 AM

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 87 88

Commentaires sur ces manuels

Pas de commentaire

Motor Saver 201-575-AU Fiche technique Page 46

Commentaires sur ces manuels